4-methylphenyl valerate (CAS 10415-86-8) in Industrial Chemicals: Properties and Specification Checks
4-methylphenyl valerate (CAS 10415-86-8; InChIKey XDIFYXKFWPNGRV-UHFFFAOYSA-N) is a chemical raw material used in Industrial Chemicals, with formula C12H16O2 and molecular weight 192.25 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- XLogP = 3.5 indicates lipophilic behaviour: poor aqueous dispersion requires a matched solvent, emulsifier or carrier, and direct addition to water risks precipitation or phase separation.
- TPSA 26 Ų and H-bond donors / 2 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
- Molecular weight 192.25 g/mol: 1 mol = 192.25 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 192.115029749 supports HRMS identification (add a proton for [M+H]+).
- InChIKey XDIFYXKFWPNGRV-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Published properties of 4-methylphenyl valerate (by CAS 10415-86-8)
| Property | Value |
|---|---|
| Molecular formula | C12H16O2 |
| Molecular weight | 192.25 g/mol |
| Accurate mass | 192.115029749 |
| IUPAC name | (4-methylphenyl) pentanoate |
| InChIKey | XDIFYXKFWPNGRV-UHFFFAOYSA-N |
| XLogP | 3.5 |
| Topological polar surface area | 26.3 Ų |
| H-bond donors / acceptors | 0 / 2 |
| Rotatable bonds | 5 |
| Heavy atoms | 14 |
Computed values above: PubChem CID 82613; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Solubility & compatibility | XLogP = 3.5 indicates lipophilic behaviour: poor aqueous dispersion requires a matched solvent, emulsifier or carrier, and direct addition to water risks precipitation or phase separation. |
| Molecular polarity | TPSA 26 Ų and H-bond donors / 2 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils. |
| Dosing & analytical checks | Molecular weight 192.25 g/mol: 1 mol = 192.25 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 192.115029749 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey XDIFYXKFWPNGRV-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | 5 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 10415-86-8) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 192.25 g/mol; XLogP 3.5; TPSA 26 Ų; InChIKey XDIFYXKFWPNGRV-UHFFFAOYSA-N |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of 4-methylphenyl valerate (CAS 10415-86-8)?
Formula C12H16O2, molecular weight 192.25 g/mol; accurate mass 192.115029749. CAS 10415-86-8 resolves the substance across PubChem and ChemSpider; InChIKey XDIFYXKFWPNGRV-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is 4-methylphenyl valerate suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 3.5 and TPSA 26 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.
How is the dosage of 4-methylphenyl valerate calculated from molecular weight?
At 192.25 g/mol, 1 mol = 192.25 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to 4-methylphenyl valerate on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey XDIFYXKFWPNGRV-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- 4 1 1 2 2 tetrafluoroethoxy benzoic acid(CAS 10009-25-3):CAS 10009-25-3: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- 4 1 1 3 3 tetramethylbutyl pyrocatechol(CAS 1139-46-4):shares the 'methyl' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- 4 1 1 3 3 tetramethylbutyl phenyl salicylate(CAS 2553-08-4):belongs to the same 'ylphenyl' series — confirm it is the same CAS; salt and free-form assays are not interchangeable by mass
- 4 1 1 2 2 tetrafluoroethoxy benzaldehyde(CAS 35295-36-4):CAS 35295-36-4: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- 4 1 1 3 3 tetramethylbutyl 1 cyclohexanol(CAS 4631-98-5):shares the 'methyl' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
- 4 1 1 2 3 3 3 hexafluoropropoxy benzoic acid(CAS 80397-17-7):CAS 80397-17-7: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for 4-methylphenyl valerate, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 82613 (https://pubchem.ncbi.nlm.nih.gov/compound/82613), accessed 2026-11-16; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.
Related Products
- 4 1 1 2 2 tetrafluoroethoxy benzoic acid (CAS 10009-25-3)
- 4 1 1 3 3 tetramethylbutyl pyrocatechol (CAS 1139-46-4)
- 4 1 1 3 3 tetramethylbutyl phenyl salicylate (CAS 2553-08-4)
- 4 1 1 2 2 tetrafluoroethoxy benzaldehyde (CAS 35295-36-4)
- 4 1 1 3 3 tetramethylbutyl 1 cyclohexanol (CAS 4631-98-5)
- 4 1 1 2 3 3 3 hexafluoropropoxy benzoic acid (CAS 80397-17-7)