Before you source Magnesium sulfate, understand what it does in Fine Chemicals
硫酸镁 (CAS 7487-88-9; InChIKey CSNNHWWHGAXBCP-UHFFFAOYSA-L) is a chemical raw material used in Industrial Chemicals, with formula MgO4S and molecular weight 120.37 g/mol. This page lists database-verifiable properties, what those values imply for formulation and QC, and a specification checklist for Industrial Chemicals applications.
Key takeaways
- TPSA 89 Ų and H-bond donors / 4 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending.
- Molecular weight 120.37 g/mol: 1 mol = 120.37 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 119.9367713 supports HRMS identification (add a proton for [M+H]+).
- InChIKey CSNNHWWHGAXBCP-UHFFFAOYSA-L is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
- rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.
Published properties of Magnesium sulfate (by CAS 7487-88-9)
| Property | Value |
|---|---|
| Molecular formula | MgO4S |
| Molecular weight | 120.37 g/mol |
| Accurate mass | 119.9367713 |
| IUPAC name | 硫酸镁 |
| InChIKey | CSNNHWWHGAXBCP-UHFFFAOYSA-L |
| Topological polar surface area | 88.6 Ų |
| H-bond donors / acceptors | 0 / 4 |
| Rotatable bonds | 0 |
| Heavy atoms | 6 |
| Melting point (product page) | 1124 °C |
Computed values above: PubChem CID 24083; melting/boiling points, where shown, come from the site product page.
What the numbers mean in practice
| Aspect | Evidence and actionable conclusion |
|---|---|
| Molecular polarity | TPSA 89 Ų and H-bond donors / 4 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending. |
| Dosing & analytical checks | Molecular weight 120.37 g/mol: 1 mol = 120.37 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 119.9367713 supports HRMS identification (add a proton for [M+H]+). |
| Substance identity | InChIKey CSNNHWWHGAXBCP-UHFFFAOYSA-L is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups. |
| Crystallisation & incoming QC | rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay. |
Specification checklist for Industrial Chemicals use
| Check | Why it matters | How to verify |
|---|---|---|
| Batch baseline (CAS 7487-88-9) | Product-specific values to check line by line against the COA and specification; salts and hydrates differ | 分子量 120.37 g/mol; TPSA 89 Ų; InChIKey CSNNHWWHGAXBCP-UHFFFAOYSA-L |
| Specification & method | Assay basis can differ for the same name | State indices, test method and acceptance rules in the contract |
| Impurities & lot consistency | Trace impurities often explain performance differences | Request impurity profiles and recent COAs; compare key indices |
| Identity check | Same-name, salt-form and hydrate confusion causes dosing errors | Cross-check CAS and InChIKey; confirm by spectroscopy where needed |
| Packaging, storage & retest | Transit conditions change the state on arrival | Check SDS storage and retest date; retain and retest on arrival |
Frequently asked questions
What are the formula, molecular weight and identifiers of Magnesium sulfate (CAS 7487-88-9)?
Formula MgO4S, molecular weight 120.37 g/mol; accurate mass 119.9367713. CAS 7487-88-9 resolves the substance across PubChem and ChemSpider; InChIKey CSNNHWWHGAXBCP-UHFFFAOYSA-L distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.
Is Magnesium sulfate suitable for Industrial Chemicals applications, and what should be checked first?
Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With limited published property data, determine solubility and addition method by bench testing rather than inference from related materials.
How is the dosage of Magnesium sulfate calculated from molecular weight?
At 120.37 g/mol, 1 mol = 120.37 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.
What incoming-QC tests apply to Magnesium sulfate on arrival?
At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey CSNNHWWHGAXBCP-UHFFFAOYSA-L or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.
Related materials
- 1 0 dodecyl rac glycerol(CAS 1561-07-5):CAS 1561-07-5: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- 1 1 1 1 2 2 tetrafluoroethylene bis oxy bis 1 2 2 trifluoroe(CAS 1998-53-4):CAS 1998-53-4: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 2 3 3 tetrafluo(CAS 35207-94-4):CAS 35207-94-4: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 chloro 2 3 3 tr(CAS 35208-02-7):CAS 35208-02-7: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
- 0 0 0 tris 4 isocyanatophenyl thiophosphate(CAS 4151-51-3):CAS 4151-51-3: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
- 1 1 1 1 2 3 propanetriyltris oxy trisoctadecane(CAS 6076-42-2):CAS 6076-42-2: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
For side-by-side comparison see site search for Magnesium sulfate, or browse the Organic Chemicals directory.
Supply & compliance
Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.
Data sources
Source: PubChem computed properties, CID 24083 (https://pubchem.ncbi.nlm.nih.gov/compound/24083), accessed 2026-11-09; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.
Related Products
- 1 0 dodecyl rac glycerol (CAS 1561-07-5)
- 1 1 1 1 2 2 tetrafluoroethylene bis oxy bis 1 2 2 trifluoroe (CAS 1998-53-4)
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 2 3 3 tetrafluo (CAS 35207-94-4)
- 1 1 1 1 2 2 tetrafluoro 1 2 ethanediyl bis 2 chloro 2 3 3 tr (CAS 35208-02-7)
- 0 0 0 tris 4 isocyanatophenyl thiophosphate (CAS 4151-51-3)
- 1 1 1 1 2 3 propanetriyltris oxy trisoctadecane (CAS 6076-42-2)