✉ info@chemsp.cn☎ +86-18553102138 ☎ 0531-84992235
📞 WhatsAppEnglish
591daili 济南圣和化工
Home › Blog › Methylparaben (CAS 99-76-3) in Industrial Chemicals: Propert

Methylparaben (CAS 99-76-3) in Industrial Chemicals: Properties and Specification Checks

2026-11-20 · Keyword:Methylparaben · CAS 99-76-3 · Jinan Shenghe Chemical Co., Ltd. · 中文

Methylparaben,When verifying methyl paraben shipments against industrial chemical specifications, the focus shifts to precise identifier matching rather than broad categorization. The CAS registry number 99-76-3 serves as the primary anchor for database cross-referencing, ensuring the material aligns with the expected methyl ester structure. Quality control teams must confirm that physical properties, such as the melting point of 125.2 degrees Celsius, correspond with the documented identity to rule out impurity mixtures. This specificity is critical in industrial supply chains where minor deviations in molecular mass or solubility parameters can disrupt downstream formulation processes. By prioritizing these distinct identifiers, procurement staff can effectively distinguish this variant from other paraben esters, maintaining strict traceability and compliance with internal technical standards without relying on generic labeling.

Key takeaways

  • XLogP = 2 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
  • TPSA 46 Ų and 1 H-bond donors / 3 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
  • Molecular weight 152.15 g/mol: 1 mol = 152.15 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 152.047344113 supports HRMS identification (add a proton for [M+H]+).
  • InChIKey LXCFILQKKLGQFO-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.

Published properties of Methylparaben (by CAS 99-76-3)

PropertyValue
Molecular formulaC8H8O3
Molecular weight152.15 g/mol
Accurate mass152.047344113
IUPAC namemethyl 4-hydroxybenzoate
InChIKeyLXCFILQKKLGQFO-UHFFFAOYSA-N
XLogP2
Topological polar surface area46.5 Ų
H-bond donors / acceptors1 / 3
Rotatable bonds2
Heavy atoms11
Melting point (product page)125.2 °C
Boiling point (product page)270.5 °C

Computed values above: PubChem CID 7456; melting/boiling points, where shown, come from the site product page.

What the numbers mean in practice

AspectEvidence and actionable conclusion
Solubility & compatibilityXLogP = 2 sits in an intermediate range: solubility cannot be assumed from experience. Run a bench test at the target pH and temperature and specify measured solubility as the acceptance criterion.
Molecular polarityTPSA 46 Ų and 1 H-bond donors / 3 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
Dosing & analytical checksMolecular weight 152.15 g/mol: 1 mol = 152.15 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 152.047344113 supports HRMS identification (add a proton for [M+H]+).
Substance identityInChIKey LXCFILQKKLGQFO-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Crystallisation & incoming QC2 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.

Specification checklist for Industrial Chemicals use

CheckWhy it mattersHow to verify
Batch baseline (CAS 99-76-3)Product-specific values to check line by line against the COA and specification; salts and hydrates differ分子量 152.15 g/mol; XLogP 2; TPSA 46 Ų; InChIKey LXCFILQKKLGQFO-UHFFFAOYSA-N
Specification & methodAssay basis can differ for the same nameState indices, test method and acceptance rules in the contract
Impurities & lot consistencyTrace impurities often explain performance differencesRequest impurity profiles and recent COAs; compare key indices
Identity checkSame-name, salt-form and hydrate confusion causes dosing errorsCross-check CAS and InChIKey; confirm by spectroscopy where needed
Packaging, storage & retestTransit conditions change the state on arrivalCheck SDS storage and retest date; retain and retest on arrival

Frequently asked questions

What are the formula, molecular weight and identifiers of Methylparaben (CAS 99-76-3)?

Formula C8H8O3, molecular weight 152.15 g/mol; accurate mass 152.047344113. CAS 99-76-3 resolves the substance across PubChem and ChemSpider; InChIKey LXCFILQKKLGQFO-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.

Is Methylparaben suitable for Industrial Chemicals applications, and what should be checked first?

Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 2 and TPSA 46 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.

How is the dosage of Methylparaben calculated from molecular weight?

At 152.15 g/mol, 1 mol = 152.15 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.

What incoming-QC tests apply to Methylparaben on arrival?

At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey LXCFILQKKLGQFO-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.

Related materials

  • Magnesium Glycinate(CAS 14783-68-7):CAS 14783-68-7: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
  • Magnesium Citrate Nonahydrate(CAS 153531-96-5):CAS 153531-96-5: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
  • Magnesium Citrate Anhydrous(CAS 3344-18-1):CAS 3344-18-1: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing
  • Magnesium Gluconate Granules(CAS 3632-91-5):CAS 3632-91-5: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
  • Magnesium Gluconate(CAS 59625-89-7):CAS 59625-89-7: a separate CAS entry; compare impurity limits and packaging conditions for Industrial Chemicals use
  • Magnesium Glycerophosphate(CAS 927-20-8):CAS 927-20-8: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing

For side-by-side comparison see site search for Methylparaben, or browse the Organic Chemicals directory.

Supply & compliance

Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.

Data sources

Source: PubChem computed properties, CID 7456 (https://pubchem.ncbi.nlm.nih.gov/compound/7456), accessed 2026-11-20; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.

← Back to Blog

Shenghe Chemical|ChemSP
鲁ICP备19037000号-1