✉ info@chemsp.cn☎ +86-18553102138 ☎ 0531-84992235
📞 WhatsAppEnglish
591daili 济南圣和化工
Home › Blog › N,N-dimethyldodecylamine-N-oxide (CAS 643-20-5) in Industria

N,N-dimethyldodecylamine-N-oxide (CAS 643-20-5) in Industrial Chemicals: Properties and Specification Checks

2026-11-21 · Keyword:N,N-dimethyldodecylamine-N-oxide · CAS 643-20-5 · Jinan Shenghe Chemical Co., Ltd. · 中文

N,N-dimethyldodecylamine-N-oxide,When verifying this specific dodecylamine N-oxide against the Industrial Chemicals supply chain, precise cross-referencing is essential. Start by confirming the CAS number 643-20-5 to prevent substitution errors with similar alkyl chains. For quality inspection, cross-check the molecular weight against 229.4. To ensure structural integrity, verify the exact mass of 229.240564612 and the molecular formula C14H31NO. In formulation assessments, the xlogp value of 5.3 dictates specific handling protocols for lipid-phase compatibility. Additionally, note the hydrogen bond properties, specifically the lack of donors with 0 HBD and a single acceptor with 1 HBA. These parameters are critical for accurate identification during inbound material audits and batch documentation.

Key takeaways

  • XLogP = 5.3 indicates lipophilic behaviour: poor aqueous dispersion requires a matched solvent, emulsifier or carrier, and direct addition to water risks precipitation or phase separation.
  • TPSA 18 Ų and H-bond donors / 1 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
  • Molecular weight 229.4 g/mol: 1 mol = 229.4 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 229.240564612 supports HRMS identification (add a proton for [M+H]+).
  • InChIKey SYELZBGXAIXKHU-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.

Published properties of N,N-dimethyldodecylamine-N-oxide (by CAS 643-20-5)

PropertyValue
Molecular formulaC14H31NO
Molecular weight229.4 g/mol
Accurate mass229.240564612
IUPAC nameN,N-dimethyldodecan-1-amine oxide
InChIKeySYELZBGXAIXKHU-UHFFFAOYSA-N
XLogP5.3
Topological polar surface area18.1 Ų
H-bond donors / acceptors0 / 1
Rotatable bonds11
Heavy atoms16

Computed values above: PubChem CID 15433; melting/boiling points, where shown, come from the site product page.

What the numbers mean in practice

AspectEvidence and actionable conclusion
Solubility & compatibilityXLogP = 5.3 indicates lipophilic behaviour: poor aqueous dispersion requires a matched solvent, emulsifier or carrier, and direct addition to water risks precipitation or phase separation.
Molecular polarityTPSA 18 Ų and H-bond donors / 1 acceptors mean a small polar surface area usually favours compatibility with non-polar resins and oils.
Dosing & analytical checksMolecular weight 229.4 g/mol: 1 mol = 229.4 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 229.240564612 supports HRMS identification (add a proton for [M+H]+).
Substance identityInChIKey SYELZBGXAIXKHU-UHFFFAOYSA-N is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Crystallisation & incoming QC11 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.

Specification checklist for Industrial Chemicals use

CheckWhy it mattersHow to verify
Batch baseline (CAS 643-20-5)Product-specific values to check line by line against the COA and specification; salts and hydrates differ分子量 229.4 g/mol; XLogP 5.3; TPSA 18 Ų; InChIKey SYELZBGXAIXKHU-UHFFFAOYSA-N
Specification & methodAssay basis can differ for the same nameState indices, test method and acceptance rules in the contract
Impurities & lot consistencyTrace impurities often explain performance differencesRequest impurity profiles and recent COAs; compare key indices
Identity checkSame-name, salt-form and hydrate confusion causes dosing errorsCross-check CAS and InChIKey; confirm by spectroscopy where needed
Packaging, storage & retestTransit conditions change the state on arrivalCheck SDS storage and retest date; retain and retest on arrival

Frequently asked questions

What are the formula, molecular weight and identifiers of N,N-dimethyldodecylamine-N-oxide (CAS 643-20-5)?

Formula C14H31NO, molecular weight 229.4 g/mol; accurate mass 229.240564612. CAS 643-20-5 resolves the substance across PubChem and ChemSpider; InChIKey SYELZBGXAIXKHU-UHFFFAOYSA-N distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.

Is N,N-dimethyldodecylamine-N-oxide suitable for Industrial Chemicals applications, and what should be checked first?

Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With XLogP 5.3 and TPSA 18 Ų, validate aqueous versus oil-phase dispersion by a bench test before fixing the addition method.

How is the dosage of N,N-dimethyldodecylamine-N-oxide calculated from molecular weight?

At 229.4 g/mol, 1 mol = 229.4 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.

What incoming-QC tests apply to N,N-dimethyldodecylamine-N-oxide on arrival?

At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey SYELZBGXAIXKHU-UHFFFAOYSA-N or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.

Related materials

  • n-Butyllithium(CAS 109-72-8):CAS 109-72-8: listed in the same Industrial Chemicals directory — compare grade, test method and COA items
  • n-Octylamine(CAS 111-86-4):shares the 'ylamine' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
  • N,N-Diethylhydroxylamine(CAS 3710-84-7):belongs to the same 'ylamine' series — confirm it is the same CAS; salt and free-form assays are not interchangeable by mass
  • N-(3-Aminopropyl)imidazole(CAS 5036-48-6):shares the 'amin' parent fragment — compare formula and molecular weight to identify salt, ester or hydrate form
  • N-[3-(dimethylamino)propyl]stearamide(CAS 7651-02-7):shares the 'dimethyl' core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
  • N-Vinyl-2-pyrrolidone(CAS 88-12-0):CAS 88-12-0: when used in Industrial Chemicals formulations, confirm addition order by a bench test before dosing

For side-by-side comparison see site search for N,N-dimethyldodecylamine-N-oxide, or browse the Organic Chemicals directory.

Supply & compliance

Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.

Data sources

Source: PubChem computed properties, CID 15433 (https://pubchem.ncbi.nlm.nih.gov/compound/15433), accessed 2026-11-21; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.

← Back to Blog

Shenghe Chemical|ChemSP
鲁ICP备19037000号-1