✉ info@chemsp.cn☎ +86-18553102138 ☎ 0531-84992235
📞 WhatsApp中文
591daili 济南圣和化工
Home › Blog › potassium lactate (CAS 996-31-6) in Food & Feed Raw Material

potassium lactate (CAS 996-31-6) in Food & Feed Raw Materials: Properties and Specification Checks

2026-11-22 · Keyword:potassium lactate · CAS 996-31-6 · Jinan Shenghe Chemical Co., Ltd. · 中文

potassium lactate,When auditing supply chain documentation for food and feed applications, discrepancies in identity verification are a common friction point. For potassium lactate, the primary reference point is CAS 996-31-6. Procurement teams often cross-check this against the molecular formula C3H5KO3 and molecular weight 128.17 to confirm purity standards. The material's topological polar surface area of 6 and hydrogen bond acceptor count of 3 are specific descriptors used to verify chemical structure integrity. In the Food & Feed Raw Materials domain, ensuring the InChIKey PHZLMBHDXVLRIX-UHFFFAOYSA-M matches the supplier's certificate of analysis is critical. Misidentifying this compound can lead to compliance issues in downstream formulations. Therefore, precise alignment of these physical and chemical parameters is essential for quality control.

Key takeaways

  • TPSA 6 Ų and 1 H-bond donors / 3 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending.
  • Molecular weight 128.17 g/mol: 1 mol = 128.17 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 127.98757550 supports HRMS identification (add a proton for [M+H]+).
  • InChIKey PHZLMBHDXVLRIX-UHFFFAOYSA-M is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
  • 1 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.

Published properties of potassium lactate (by CAS 996-31-6)

PropertyValue
Molecular formulaC3H5KO3
Molecular weight128.17 g/mol
Accurate mass127.98757550
IUPAC namepotassium 2-hydroxypropanoate
InChIKeyPHZLMBHDXVLRIX-UHFFFAOYSA-M
Topological polar surface area60.4 Ų
H-bond donors / acceptors1 / 3
Rotatable bonds1
Heavy atoms7

Computed values above: PubChem CID 23671663; melting/boiling points, where shown, come from the site product page.

What the numbers mean in practice

AspectEvidence and actionable conclusion
Molecular polarityTPSA 6 Ų and 1 H-bond donors / 3 acceptors mean hydrogen bonding with alcohol-, water- or amide-containing systems warrants a viscosity and clarity check after blending.
Dosing & analytical checksMolecular weight 128.17 g/mol: 1 mol = 128.17 g. Use this for stoichiometric, neutralisation or substitution calculations — never substitute a related material by mass alone. Accurate mass 127.98757550 supports HRMS identification (add a proton for [M+H]+).
Substance identityInChIKey PHZLMBHDXVLRIX-UHFFFAOYSA-M is the reliable cross-database identifier — more dependable than a trade or common name for ruling out hydrate/anhydrous and same-name-different-substance mix-ups.
Crystallisation & incoming QC1 rotatable bonds: flexible molecules often crystallise slowly and form solvates. If caking or a broad melting range appears, check polymorph and residual solvent before rejecting the assay.

Specification checklist for Food & Feed Raw Materials use

CheckWhy it mattersHow to verify
Batch baseline (CAS 996-31-6)Product-specific values to check line by line against the COA and specification; salts and hydrates differ分子量 128.17 g/mol; TPSA 6 Ų; InChIKey PHZLMBHDXVLRIX-UHFFFAOYSA-M
Grade & regulatory fitFood/feed and industrial grades carry different statutory limitsRequest the grade-specific COA and production licence; check against GB 1886 / FCC / USP or the customer spec
Batch-level safety indicesHeavy metals, arsenic, microbes and residual solvents are statutory; assay alone does not establish complianceMatch report lot numbers to the COA, retain samples and arrange third-party retest for critical lots
Assay basis & hydrationAnhydrous vs hydrated mass changes both dosing and settlementState the assay basis in the contract; verify by loss on drying or Karl Fischer
Packaging & arrival retestHygroscopic materials cake and drift in assay after moisture uptakeUse moisture-barrier liners; retest water content and appearance on arrival with ambient humidity logged

Frequently asked questions

What are the formula, molecular weight and identifiers of potassium lactate (CAS 996-31-6)?

Formula C3H5KO3, molecular weight 128.17 g/mol; accurate mass 127.98757550. CAS 996-31-6 resolves the substance across PubChem and ChemSpider; InChIKey PHZLMBHDXVLRIX-UHFFFAOYSA-M distinguishes same-name substances, salts and hydrates. Use the molecular weight for stoichiometric conversion; purity and grade follow the batch COA.

Is potassium lactate suitable for Food & Feed Raw Materials applications, and what should be checked first?

Three checks: (1) the regulatory grade and production licence for the intended use; (2) impurity and safety indices plus test methods on the batch COA; (3) identity via CAS and substance identifiers to rule out hydrate/anhydrous or salt/free-form mix-ups. With limited published property data, determine solubility and addition method by bench testing rather than inference from related materials.

How is the dosage of potassium lactate calculated from molecular weight?

At 128.17 g/mol, 1 mol = 128.17 g. Blending, substitution and neutralisation should be calculated on molar equivalence, not by substituting mass parts of a related material. For hydrates or salts, adjust for active content and water of crystallisation from the COA.

What incoming-QC tests apply to potassium lactate on arrival?

At minimum: match the COA lot to the goods; retest assay and loss on drying / water; confirm identity via InChIKey PHZLMBHDXVLRIX-UHFFFAOYSA-M or spectroscopy; retain a sample with opening conditions logged. Caking, colour shift or a broad melting range should trigger polymorph and residual-solvent checks.

Related materials

  • Milrinone lactate(CAS 100286-97-3):shares the same parent fragment — compare formula and molecular weight to identify salt, ester or hydrate form
  • PHENYL ETHYL LACTATE(CAS 10138-63-3):shares the same core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
  • (R)-Lactate(CAS 10326-41-7):belongs to the same series — confirm it is the same CAS; salt and free-form assays are not interchangeable by mass
  • Calcium Lactate Gluconate(CAS 11116-97-5):shares the same parent fragment — compare formula and molecular weight to identify salt, ester or hydrate form
  • LACTATE(CAS 113-21-3):shares the same core; before substituting, check the CAS and molecular-weight gap, as salt formation adds a counter-ion
  • tetradecyl lactate(CAS 1323-03-1):belongs to the same series — confirm it is the same CAS; salt and free-form assays are not interchangeable by mass

For side-by-side comparison see site search for potassium lactate, or browse the Organic Chemicals directory.

Supply & compliance

Jinan Shenghe Chemical Co., Ltd. supplies industrial and fine chemicals. When enquiring, state the product name, CAS, target grade and packaging; COA, SDS and technical data sheets are available with the shipment. Contact: info@chemsp.cn | +86-18553102138. This page is technical information for industrial raw materials; regulated food, feed, cosmetic or pharmaceutical uses require the corresponding grade and compliance with local rules.

Data sources

Source: PubChem computed properties, CID 23671663 (https://pubchem.ncbi.nlm.nih.gov/compound/23671663), accessed 2026-11-22; melting/boiling points, where shown, come from the site product page. Hydrates and salts carry different values — verify by CAS and InChIKey.

← Back to Blog

Shenghe Chemical|ChemSP
鲁ICP备19037000号-1